In this article we will discuss about the electrical circuit of a refrigerator with its diagram.
The applications of refrigeration for domestic purposes are mainly in the form of domestic refrigerators and home freezers. The main purpose of this type of refrigeration is to provide low temperature for storage and distribution of foods and drinks. It represents a significant portion of the refrigeration industry due to the use of these units in large number.
The growth of food destroying micro-organisms is quite fast (about 100 times) at 10°C than at a temperature lower than 4°C. In order to preserve the fruits, vegetables, fish, meat, milk, medicines etc. against spoilage at higher temperature (generally during summer season), the use of refrigerators is very much emphasized. The storage of perishable products at low temperature greatly reduces the activity of both the enzymes and micro-organisms.
For domestic preservation, the storage is generally short- term or temporary storage. The domestic refrigerators and freezers used for the purpose are usually small in sizes with ratings ranging from 1/20 to 1/2 tonne. The units are usually self-contained and hermetically sealed. Due to short-term storage the domestic refrigerator load is intermittent.
The requirements of domestic refrigerator is that it should be simple in construction, automatic in action, nominal in initial cost, dependable, and without any necessity of expert inspection and repair. Non-irritant and non-toxic refrigerant should be used. Generally methylene chloride, Freon-12 and Freon-11 are used as the refrigerants.
The common types of domestic refrigerator have a cabinet shaped with compressor motor-fan assembly, the condenser and receiver fitted in their basement. The expansion valve and evaporator coils are exposed in the storage cabinet with the pipings, carrying liquid refrigerant passing through the body. The heat of the bodies to be cooled is carried to the evaporator coils by means of air trapped in the cabinet.
The refrigerator used may be the open compressor type; hermetically sealed compressor type or absorption type. Usually hermetically sealed type refrigerators are used. The main advantages are that the problem of gas leakage is minimised as no moving part extends through the sealed housing, it has relatively silent operation and it does not require any maintenance. In open type compressor, the motor drives the compressor using pulley and belt arrangement. This is employed in large commercial refrigerators.
Refrigeration is not only provided with double walled cabinet packed with materials having high thermal insulation such as fibreglass, cork or expanded rubber but also all-round the inside of door flap soft rubber seal is used which makes the cabinet airtight. Also the door is provided with automatic closing mechanism-door hinges are provided in such a way that door flap when left in open position automatically comes to closing position due to gravity and as it approaches closing position it is attracted by the magnetic strip fitted behind the sealing rubber ring and thus the door is closed with snap action. All this is done to prevent leakage of atmospheric heat inside the refrigerator.
Main precaution to be taken is that very hot things should not be put in refrigerator, if it is done it will quickly evaporate the refrigerant in evaporator coils producing a large vapour pressure resulting in increase in the duty of the compressor and as such motor has to work for longer duration in order to bring down the temperature in the freezer compartment. It may damage the motor, which is short-time rated. Also moisture released from hot things will freeze around the freezer compartment which has to be defrosted.
Electrical circuit of a refrigerator is shown in Fig. 9.5. Refrigerator is provided with a door push switch, which closes on opening of refrigerator and puts the lamp on. Capacitor-start single phase induction motor is used in open type refrigerators and split-phase single phase induction motor is used in sealed unit refrigerators. Electromagnetic relay is provided to connect auxiliary winding on the start and disconnect it when the motor picks up the speed. Thermal overload release is provided to protect the motor from damage against flow of overcurrent.
Thermostat switch is provided to control the temperature inside the refrigerator. Temperature inside the refrigerator can be adjusted by means of temperature control screw. Greater the distance between contacts, greater will be the temperature inside the refrigerator and vice versa. To protect the motor against undervoltage use of automatic voltage regulator is essential since in case of fall in applied voltage, motor will draw heavy current to develop the required torque and will become hot, thermal overload relay will, therefore, repeatedly disconnect and connect the motor to supply, eventually burning it out.