Tag Archives | Admixtures

Classification of Admixtures | Concrete Technology

The admixtures can be broadly classified according to their characteristic effect as follows: 1. Accelerating Admixtures 2. Accelerator Plasticizer 3. Retarders 4. Oil Wells 5. Retarding Plasticizer (Water Reducing Admixtures) 6. Air Entrainment 7. Air Contents 8. Gas Forming Agents 9. Damp and Water Proofing Admixtures 10. Workability Agents and a Few Others. 1. Accelerating Admixtures: Sometimes conditions require to [...]

By |2017-12-18T06:19:48+05:30December 18, 2017|Admixtures|Comments Off on Classification of Admixtures | Concrete Technology

Admixtures: History and Functions | Concrete Technology

Admixtures may be defined as the materials other than the basic ingredients of concrete i.e., cement, aggregates and water added to the concrete mix immediately before or during the mixing process to modify one or more specific properties of concrete in fresh or hardened state. Whereas an additive is a material which is added at the time of grinding cements [...]

By |2017-12-18T06:19:48+05:30December 18, 2017|Admixtures|Comments Off on Admixtures: History and Functions | Concrete Technology

Types of Pozzolanic Materials | Admixtures | Concrete Technology

Pozzolanic materials are siliceous and aluminous materials, possessing little or no cementitious value by themselves, but in finely divided form and in the presence of moisture react chemically with calcium hydroxide liberated on hydration of cement at ordinary temperature to form compounds, possessing cementitious properties. The Silicious or aluminious compounds in a finely divided form react with calcium hydroxide to [...]

By |2017-12-18T06:19:48+05:30December 18, 2017|Admixtures|Comments Off on Types of Pozzolanic Materials | Admixtures | Concrete Technology

Effects of Super Plasticizers on Concrete | Concrete Technology

By nominal dosages of plasticizers or super plasticizers the improvement in the workability of very stiff or zero slump concrete has not been observed. A mix having 20 mm to 30 mm initial slump can only be fluidised by the use of plasticizers or super plasticizers. To fluidify a no slump concrete a high dosage is required. An improvement in [...]

By |2017-12-18T06:19:48+05:30December 18, 2017|Admixtures|Comments Off on Effects of Super Plasticizers on Concrete | Concrete Technology

Plasticizers: Materials, Action and Uses | Admixtures | Concrete Technology

In this article we will discuss about:- 1. Introduction to Plasticizers 2. Materials Used as Plasticizers 3. Action. Introduction to Plasticizers (Water Reducing Agents): The essence of good quality concrete is the requirement of right workability. Under different situations concrete of different degree of workability is needed. A high degree of workability is required in situations like deep beams, thin [...]

By |2017-12-18T06:19:48+05:30December 18, 2017|Plasticizers|Comments Off on Plasticizers: Materials, Action and Uses | Admixtures | Concrete Technology

Super Plasticizers: Classification and Uses | Concrete Technology

In this article we will discuss about:- 1. Meaning of Super Plasticizers 2. Classification of Super Plasticizers 3. Uses. Meaning of Super Plasticizers: Super plasticizers are also called high range water reducers. They are of recent origin and relatively are more effective type water reducing admixtures. They were developed in Japan and Germany during 1960 and 1970 respectively. Chemically they [...]

By |2017-12-18T06:19:47+05:30December 18, 2017|Plasticizers|Comments Off on Super Plasticizers: Classification and Uses | Concrete Technology
Go to Top