Tag Archives | Control of Harmonic Distortions

Where to Control Harmonic Distortion? | Power System

The strategies for mitigating harmonic distortion problems differ somewhat by location. The following techniques are ways for controlling harmonic distortion on both the utility distribution feeder and end-user power system. Control Harmonic Distortion on Utility Distribution Feeders:  The X/R ratio of a utility distribution feeder is generally low. Therefore, the magnification of harmonics by resonance with feeder banks is usually [...]

By |2017-12-28T10:24:51+05:30December 28, 2017|Harmonic Distortions|Comments Off on Where to Control Harmonic Distortion? | Power System

Control of Harmonic Distortion: 4 Methods | Electrical Engineering

The following points highlight the four main methods used for controlling harmonic distortion in power system. The methods are: 1. Constant Frequency Control 2. Constant Tolerance Band Control 3. Variable Tolerance Band Control 4. Discontinuous Current Control. Method # 1. Constant Frequency Control: A usage of frequency controlled drives with AC motors (like asynchronous or synchronous) increased in last few [...]

By |2017-12-28T10:24:51+05:30December 28, 2017|Harmonic Distortions|Comments Off on Control of Harmonic Distortion: 4 Methods | Electrical Engineering
Go to Top