Tag Archives | Jigs

Top 11 Types of Jigs | Machine Tools | Industries | Engineering

Various types of jigs used are described below: Type # 1. Template Jigs: They are the simplest type used more for accuracy than speed. This type of jig fits over, on, or into the work and is not usually clamped, (Refer Fig. 28.15). If bushings are not used, then the whole jig plate is normally hardened. Type # 2. Plate [...]

By Surupa S|2017-07-24T11:54:16+05:30July 24, 2017|Machine Tools|Comments Off

Types of Drill Bushes | Jigs | Machine Tools | Industrial Engineering

Drill bushes are classified as follows: 1. Fixed Bushes 2. Liner Bushes 3. Renewable Bushes 4. Slip-in Bushes 5. Screw or clamp Bushes 6. Special Bushes. Type # 1. Fixed Bushes or Press-Fit Bushes: These are used for limited production tooling where no change in bushing is called for. It should be light press fit. These may be headed or [...]

By Surupa S|2017-07-24T11:54:12+05:30July 24, 2017|Machine Tools|Comments Off