Tag Archives | Steam Generator

Boiler Draught and its Classification | Thermodynamics

Draught is the pressure difference which is necessary to draw the required quantity of air for combustion and to remove the flue gases out of the system. Thus the object of producing draught in a boiler is: (i) To provide sufficient quantity of air for combustion (ii) To make the resulting hot gases, to flow through the system (iii) To [...]

By |2018-07-23T10:36:44+05:30July 23, 2018|Boiler|Comments Off on Boiler Draught and its Classification | Thermodynamics

Boiler: Meaning, Development, Types and Calculations | Thermodynamics

In this article we will discuss about:- 1. Meaning of Boiler 2. Historical Development of the Boiler 3. Classification 4. Essentials 5. Introduction to IBR or Regulations for Chimney (with Reference to IBR/MSNC Bombay) 6. Boiler Calculations. Contents: Meaning of Boiler Historical Development of the Boiler Classification of Boilers Essentials of a Good Boiler Introduction to IBR or Regulations for [...]

By |2018-07-23T10:36:44+05:30July 23, 2018|Boiler|Comments Off on Boiler: Meaning, Development, Types and Calculations | Thermodynamics

Mountings and Accessories of a Boiler | Thermodynamics

Here is a list of twelve major mountings and accessories of a boiler. 1. Dead Weight Safety Valve: As the name implies, this valve is used to assure safe working of the boiler. When the pressure of steam inside the boiler drum increases beyond the safety valve, it may cause damage to the pressure part, or even a severe accident. [...]

By |2018-07-23T10:36:43+05:30July 23, 2018|Boiler|Comments Off on Mountings and Accessories of a Boiler | Thermodynamics
Go to Top