Tag Archives | Three-Phase AC Circuits

Each coil of three phases has two terminals (one 'start' and another 'finish') and if individual phase is connected to a separate load circuit, as illustrated in Fig. 7.3, we get a non-interlinked three- phase, six-wire system. Then, by Ohm's law, the current in individual phase will be: IP = EP/ZP … (7.4) Where Ip is the phase current, Ep [...]

In this article we will discuss about: 1. Introduction to Three-Phase AC Circuits 2. Generation of 3-Phase EMF in AC Circuits 3. Phase Sequence  4. Conversion of Balanced Load System from Star to Delta and Vice-Versa 5. Balancing Parallel Loads. Contents: Introduction to Three-Phase AC Circuits Generation of 3-Phase EMF in AC Circuits Phase Sequence in Three-Phase AC Circuits Conversion [...]