Tag Archives | Hot Working Process

Design of Forging Hammers (With Diagram) | Metals | Industries | Metallurgy

Forging hammers are commonly used for impression-die forging and can be used for a variety of forging operations. In forging hammers a heavy ram containing the upper die is lifted by steam pressure or air pressure, then driven or allowed to fall on the workpiece which is placed on the bottom die, which in turn is supported on the anvil. [...]

By |2017-07-24T11:54:35+05:30July 24, 2017|Forging|Comments Off on Design of Forging Hammers (With Diagram) | Metals | Industries | Metallurgy

Design Considerations in Forging | Metals | Industries | Metallurgy

In this article we will discuss about the general design consideration in forging of metals. Factors Influencing the Design of a Forging: The various factors which require due consideration and which influence the design of a forging are: (i) Shape and size, (ii) Grade and composition of metal, (iii) Quantity required, (iv) Subsequent processing and heat-treatment, and (v) End use. [...]

By |2017-07-24T11:54:35+05:30July 24, 2017|Forging|Comments Off on Design Considerations in Forging | Metals | Industries | Metallurgy

Forging: Characteristics and Defects | Metals | Industries | Metallurgy

In this article we will discuss about:- 1. Introduction to Forging 2. Temperature Range for Forging 3. Advantages and Disadvantages 4. Guidelines 5. Open Die Forging 6. Operation 7. Closed Die Forging Die Design 8. Characteristics 9. Defects 10. Forces 11. Forces. Contents: Introduction to Forging Temperature Range for Forging Characteristics of the Forged Parts Guidelines for Forging Open Die [...]

By |2017-07-24T11:54:35+05:30July 24, 2017|Forging|Comments Off on Forging: Characteristics and Defects | Metals | Industries | Metallurgy

Top 9 Methods of Forging | Metals | Industries | Metallurgy

The following points highlight the top nine methods adopted for forging. The methods are: 1. Drop Forging 2. Press Forging 3. Hammer and Press Forgings 4. Hot Bar Forging 5. Upset Forging 6. Electrical Upset Forging 7. Swing Forging 8. Cored Forging 9. Rotary Forging. Method # 1. Drop Forging: The difference between drop forging and smith forging is that [...]

By |2017-07-24T11:54:35+05:30July 24, 2017|Forging|Comments Off on Top 9 Methods of Forging | Metals | Industries | Metallurgy

Forces Involved in Hot Rolling of Metals | Industries | Metallurgy

The frictional force of the rolls on the material acts in the direction of material movement on the entry side of the neutral point, but on the exit side of the neutral point the frictional force of the rolls on the material acts in the reverse direction of the material movement as shown in Fig. 5.2. It is difficult to [...]

By |2017-07-24T11:54:33+05:30July 24, 2017|Hot Working Process|Comments Off on Forces Involved in Hot Rolling of Metals | Industries | Metallurgy
Go to Top